Cut list

Every frame member, sized from the drawings. Lengths are what you cut. Sloping members give the long point, cut 3° at the top. The side wall quantities already cover both walls.

F01 Back wall (high side)
Member	Size	Treated	Qty	Length	Cut
Bottom plate	90×45	H3	1	3,260	Square
Top plate, lower	90×45	H2	1	3,260	Square
Top plate, upper	90×45	H2	1	3,260	Square
Stud, corner	90×45	H2	6	2,515	Square
Stud	90×45	H2	5	2,515	Square
Nogging	90×45	H2	2	443	Square
Nogging	90×45	H2	8	555	Square

F02 Front wall (low side, doors)
Member	Size	Treated	Qty	Length	Cut
Bottom plate	90×45	H3	1	3,260	Square
Top plate, lower	90×45	H2	1	3,260	Square
Top plate, upper	90×45	H2	1	3,260	Square
Door lintel, 2 pieces nailed together	190×45	H2	2	1,830	Square
Head trimmer, laid flat	90×45	H2	1	1,740	Square
Stud, corner	90×45	H2	6	2,365	Square
Stud, door jamb	90×45	H2	2	2,365	Square
Jack stud	90×45	H2	2	2,175	Square
Nogging	90×45	H2	2	535	Square

F03 Side walls, build two the same
Member	Size	Treated	Qty	Length	Cut
Bottom plate	90×45	H3	2	2,780	Square
Top plate, lower (raked)	90×45	H2	2	2,784	3° plumb cut both ends
Top plate, upper (raked)	90×45	H2	2	2,784	3° plumb cut both ends
Window lintel, 2 pieces nailed together	140×45	H2	4	1,320	Square
Sill trimmer, laid flat	90×45	H2	2	1,230	Square
Stud, end (back)	90×45	H2	2	2,515	3° top cut, long point
Stud, end (front)	90×45	H2	2	2,372	3° top cut, long point
Stud, window jamb	90×45	H2	2	2,450	3° top cut, long point
Stud, window jamb	90×45	H2	2	2,378	3° top cut, long point
Jack stud	90×45	H2	4	2,055	Square
Stud	90×45	H2	2	2,490	3° top cut, long point
Stud	90×45	H2	2	2,459	3° top cut, long point
Cripple under sill	90×45	H2	4	1,390	Square
Cripple over lintel	90×45	H2	2	232	3° top cut, long point
Cripple over lintel	90×45	H2	2	201	3° top cut, long point
Nogging	90×45	H2	4	443	Square
Nogging	90×45	H2	6	555	Square
Nogging	90×45	H2	2	338	Square
Nogging	90×45	H2	2	248	Square

R01 Roof framing
Member	Size	Treated	Qty	Length	Cut
Rafter	140×45	H2	7	3,365	Plumb cut both ends
Blocking over back wall	140×45	H2	1	533	Square
Blocking over back wall	140×45	H2	4	555	Square
Blocking over back wall	140×45	H2	1	193	Square
Blocking over front wall	140×45	H2	1	533	Square
Blocking over front wall	140×45	H2	4	555	Square
Blocking over front wall	140×45	H2	1	193	Square
Ceiling joint nogging, laid flat	90×45	H2	1	533	Square
Ceiling joint nogging, laid flat	90×45	H2	4	555	Square
Ceiling joint nogging, laid flat	90×45	H2	1	193	Square
Batten, laid flat	70×35	H3	5	3,410	Square
Fascia (front)	140×45	H3	1	3,410	Square

What to order

The cut list packed onto standard lengths, allowing a 3 mm saw cut and 5 mm trim per piece. Nothing longer than 4.8 m, so it fits a ute or roof racks. 218.1 m in total, about 4% offcut.

Timber	Length	Qty	Used for
90×45 MGP10 H2	4.8 m	25	Studs, top plates, noggings, trimmers
90×45 MGP10 H2	4.2 m	1	Studs, top plates, noggings, trimmers
90×45 MGP10 H2	2.7 m	7	Studs, top plates, noggings, trimmers
90×45 MGP10 H3	3.6 m	2	Bottom plates (sit on the slab)
90×45 MGP10 H3	3.0 m	2	Bottom plates (sit on the slab)
140×45 MGP10 H2	4.8 m	7	Rafters, blocking, window lintels
140×45 MGP10 H2	2.4 m	1	Rafters, blocking, window lintels
140×45 MGP10 H3	3.6 m	1	Fascia
190×45 MGP10 H2	4.2 m	1	Door lintel
70×35 MGP10 H3	3.6 m	5	Roof battens

Cutting plan: which pieces come out of which length

90×45 H2

4.8 m → 2,784 + 1,230 + 555 + 201 (offcut 1)
4.8 m → 2,784 + 1,230 + 555 + 201 (offcut 1)
4.8 m → 2,784 + 1,740 + 248 (offcut 7)
4.8 m → 2,515 + 2,055 + 193 (offcut 16)
4.8 m → 2,515 + 443 + 443 + 443 + 443 + 443 (offcut 25)
4.8 m → 2,515 + 555 + 555 + 555 + 555 (offcut 28)
4.8 m → 2,515 + 555 + 555 + 555 + 555 (offcut 28)
4.8 m → 2,515 + 555 + 555 + 555 + 555 (offcut 28)
4.8 m → 2,378 + 2,378 (offcut 31)
4.8 m → 2,372 + 2,372 (offcut 43)
4.8 m → 2,365 + 2,365 (offcut 57)
4.8 m → 2,365 + 2,365 (offcut 57)
4.8 m → 2,365 + 2,365 (offcut 57)
4.8 m → 2,365 + 2,365 (offcut 57)
4.8 m → 2,784 + 555 + 555 + 555 + 248 (offcut 66)
4.8 m → 2,515 + 555 + 535 + 535 + 533 (offcut 90)
4.8 m → 2,515 + 2,175 (offcut 97)
4.8 m → 2,515 + 2,175 (offcut 97)
4.8 m → 3,260 + 1,390 (offcut 137)
4.8 m → 3,260 + 1,390 (offcut 137)
4.8 m → 3,260 + 1,390 (offcut 137)
4.8 m → 3,260 + 1,390 (offcut 137)
4.8 m → 2,515 + 2,055 (offcut 217)
4.8 m → 2,515 + 2,055 (offcut 217)
4.8 m → 2,515 + 2,055 (offcut 217)
4.2 m → 2,515 + 443 + 338 + 338 + 232 + 232 (offcut 57)
2.7 m → 2,515 (offcut 180)
2.7 m → 2,490 (offcut 205)
2.7 m → 2,490 (offcut 205)
2.7 m → 2,459 (offcut 236)
2.7 m → 2,459 (offcut 236)
2.7 m → 2,450 (offcut 245)
2.7 m → 2,450 (offcut 245)

90×45 H3

3.6 m → 3,260 (offcut 335)
3.6 m → 3,260 (offcut 335)
3.0 m → 2,780 (offcut 215)
3.0 m → 2,780 (offcut 215)

140×45 H2

4.8 m → 3,365 + 1,320 (offcut 102)
4.8 m → 3,365 + 1,320 (offcut 102)
4.8 m → 3,365 + 1,320 (offcut 102)
4.8 m → 3,365 + 1,320 (offcut 102)
4.8 m → 3,365 + 555 + 555 + 193 (offcut 103)
4.8 m → 3,365 + 555 + 555 + 193 (offcut 103)
4.8 m → 3,365 + 555 + 555 (offcut 304)
2.4 m → 555 + 555 + 533 + 533 (offcut 195)

140×45 H3

3.6 m → 3,410 (offcut 185)

190×45 H2

4.2 m → 1,830 + 1,830 (offcut 527)

70×35 H3

3.6 m → 3,410 (offcut 185)
3.6 m → 3,410 (offcut 185)
3.6 m → 3,410 (offcut 185)
3.6 m → 3,410 (offcut 185)
3.6 m → 3,410 (offcut 185)